Description
The unit offers several load-and-speed configurations that deliver a maximum hook-load of 32 t (70,500 lb). It is designed to pull and run sucker rods, remove and/or install tubing while breaking out pipe, perform well-integrity pressure tests, and carry out 9⁄16-in sand-line swabbing. All primary functions are hydraulically driven and operated from an electronic joystick control panel.
2. Principal Dimensions & Capacities
| Parameter |
Metric |
Imperial |
| Maximum mast height (extended) |
19.96 m |
65.5 ft |
| Maximum working-floor height |
2.36 m |
7.54 ft |
| Mast height (retracted) |
13.46 m |
44 ft |
| Nominal hook-load |
32 t |
70,500 lb |
Type of mast: closed-box structure with hydraulic locks; two-section telescopic; no guy lines required.
3. Mast / Crown Block
| Item |
Specification |
| Manufacturer |
JET OIL TECHNOLOGY |
| Sheaves & size |
2 × 18 in (for 9⁄16-in line) and 6 × 18 in (for 7⁄8-in line) |
| Maximum load (6 lines) |
32 t / 70,500 lb |
| Monkey-board capacity |
None (without monkey board) |
4. Travelling Block
| Item |
Specification |
| Manufacturer |
JET OIL TECHNOLOGY |
| Configuration |
3 × 18 in sheaves |
| Rated capacity |
32 t |
5. Drill Line & Sand-Line
| Item |
Drill Line |
Sand-Line |
| Diameter |
7⁄8 in (6 × 19 S + 1) |
9⁄16 in (6 × 7 + 1) |
| API breaking strength |
354 kN |
116 kN |
| Safety factor |
5 |
3 |
6. Auxiliary Hoist
| Capacity | 1.5 t |
| Drive | Hydraulic |
7. Mud Pump (Integrated in Carrier)
| Item |
Specification |
| Model |
JMEE 10000/24 MPA (Triplex) |
| Maximum pressure |
3,000 psi |
| Maximum flow rate |
170 L min⁻¹ |
| Output power |
100 hp |
8. Hydraulic Power Unit (Carrier-Mounted)
| Item |
Specification |
| Engine brand |
Parker Calzoni |
| Model |
MRD 5400 (series A2F) |
| Type |
Axial-piston hydraulic motor |
9. Fluid Tank (Carrier-Mounted)
| Capacity | 6 m³ |
10. Draw-Works
| Item |
Main Drum |
Sand-Line Drum |
| Drum diameter |
14 in |
8 in |
| Brake diameter |
39 in |
39 in |
| Hook speed – high / low (4 lines) |
22 m min⁻¹ / 15 m min⁻¹ |
— |
| Draw-Works Hydraulic Motor | Parker Calzoni MRD 4500 |
| Max working temperature | 80 °C |
| Hydraulic pump | Sauer Danfoss PVRE Series 2 – 162F1310 |
| Pressure | 3,770 psi |
| Flow rate | 308.7 L min⁻¹ |
| Speed | 2,100 rpm |
11. Electronic / Hydraulic Controls
12. Truck & Chassis
| Item |
Specification |
| Base vehicle |
IVECO Tector Attack 8×4 260E30 |
| Truck engine |
IVECO FPT NEF 6 – Euro V |
| Sub-frame |
Integral design with five support points |
13. Weights
| Gross vehicle weight | 30 t |
14. Monitoring & Instrumentation
| Function |
Instrument |
| Hook-load / weight |
Martin Decker weight indicator |
| Pump pressure |
Cameron (or higher-spec) pressure gauge |
| Truck coolant temperature |
Iveco indicator |
| Truck hydraulic-oil pressure |
Danfoss gauge |
| Truck engine RPM |
Iveco tachometer |
| Hydraulic-oil temp & pressure |
Assorted indicators |
Reviews
There are no reviews yet.