Shipping worldwide · Calgary, Alberta, Canada
Mon–Fri 8:00–17:00 MST+1 (403) 251-3808
2015 Western Star 4900 Flushby Unit 16 – Flushby Rigs for sale at Canada Oilfield Equipment, with international shipping. Image 1 of 11.1 / 11
Specifications

The unit, spec by spec

Ask and we'll send the full inspection report with photos.

Truck2014 Western Star, tandem/tridem
Rig2014 Automated Rig Technologies telescopic double rod rig
Kilometres49,315
Hours4,313
Weight65,000 lbs (spec sheet range is 65,000–70,000 lbs)
Width2.6 m (8'6")
Height4.2 m (13'9")
DesignAPI 4F, 4th Edition; PSL 1; SSL E1/U1
LightingClass 1 Div. 2 (API RP 505)
Wind rating, unguyed mast32 knots operating, 60 knots unexpected, 75 knots expected
Operating temperature−20 °C to +40 °C
Max hookload35 tons (70,000 lbs)
Lines2-line, 1" (API 9A/9B)
Clear height under the crown72'
Clear height under the rod board57'
Crown sheaves24" Nylatron (×2), Timken bearings
Travelling blockAPI 8C, 35-ton, 22" sheave
Rod hook25-ton
Rod board25' doubles, 1" max rod size
5/8" rods13,000'
3/4" rods10,500'
7/8" rods9,000'
1" rods7,800'
CylindersRHK scoping and raising cylinders
Fall arrestMiller self-retracting lifelines
Rod transferpneumatic
Lightingfull mast lighting with a strobe on the crown
Drawworks (hydraulic)1" spiral-groove drum, 35,000 lbs single-line pull, about 840 ft/min
Service winchPullmaster PL5, 4,500 lbs
Drill lineslip-and-cut spool with 400' of 1" line
Deadline anchor35,000 lbs, with electronic line-rider weight indicator
OutriggersMaxistab 3-EAH/K, 16'4-7/8" max extension
Workfloor8' × 5'8½", height adjustable from 4' to 8'6"
TriplexGardner-Denver 3 x 5 (TEE), 3" plungers, 5,000 psi
Triplex driveHägglunds CA50, Sauer-Danfoss 90R130 hydrostatic
Charge pump4" Bowie
Pulsation dampener2.5 gal, 5,000 psi
Discharge piping2" XXH
Hydraulic tank250 gal
Genset5 kW Fabco hydraulic drive
Belly jacksRHK
Screen displaytriplex flow and pressure, hydraulic pressures and temperatures, BOP pressure

2015 Western Star Tandem/Tridem Flushby – Automated Rig Technologies Telescopic Double Rod Rig, 35-Ton Hookload, Plumbed for Coiled Rod Injector (Rig 16)

This is a low-hour 2014 flushby and rod rig with only 49,313 km and 4,313 hours. It is mounted on a Western Star tandem steer / tridem drive chassis. The rig is a 2014 Automated Rig Technologies (ART) telescopic double mast with 72' of clear height under the crown and a 35-ton (70,000 lbs) maximum hookload. The mast is built to API 4F, 4th Edition. The fluid end has a Gardner-Denver 3 x 5 triplex rated for 5,000 psi and an 8 m³ aluminum TC406 tank. It also has a 35,000 lbs hydraulic drawworks and an air-purged Class 1 Div. 2 operator console. The rig is set up for conventional sucker rod service and is plumbed for a coiled rod injector. The injector is not included.

Confirmed

Unit

  • Truck: 2014 Western Star, tandem/tridem
  • Rig: 2014 Automated Rig Technologies telescopic double rod rig
  • Kilometres: 49,315
  • Hours: 4,313
  • Weight: 65,000 lbs (spec sheet range is 65,000–70,000 lbs)
  • Width: 2.6 m (8'6")
  • Height: 4.2 m (13'9")

Mast

  • Design: API 4F, 4th Edition; PSL 1; SSL E1/U1
  • Lighting: Class 1 Div. 2 (API RP 505)
  • Wind rating, unguyed mast: 32 knots operating, 60 knots unexpected, 75 knots expected
  • Operating temperature: −20 °C to +40 °C
  • Max hookload: 35 tons (70,000 lbs)
  • Lines: 2-line, 1" (API 9A/9B)
  • Clear height under the crown: 72'
  • Clear height under the rod board: 57'
  • Crown sheaves: 24" Nylatron (×2), Timken bearings
  • Travelling block: API 8C, 35-ton, 22" sheave
  • Rod hook: 25-ton
  • Rod board: 25' doubles, 1" max rod size
    • 5/8" rods: 13,000'
    • 3/4" rods: 10,500'
    • 7/8" rods: 9,000'
    • 1" rods: 7,800'
  • Cylinders: RHK scoping and raising cylinders
  • Fall arrest: Miller self-retracting lifelines
  • Rod transfer: pneumatic
  • Lighting: full mast lighting with a strobe on the crown

Rear module

  • Drawworks (hydraulic): 1" spiral-groove drum, 35,000 lbs single-line pull, about 840 ft/min
  • Service winch: Pullmaster PL5, 4,500 lbs
  • Drill line: slip-and-cut spool with 400' of 1" line
  • Deadline anchor: 35,000 lbs, with electronic line-rider weight indicator
  • Outriggers: Maxistab 3-EAH/K, 16'4-7/8" max extension
  • Workfloor: 8' × 5'8½", height adjustable from 4' to 8'6"

Front module

  • Triplex: Gardner-Denver 3 x 5 (TEE), 3" plungers, 5,000 psi
  • Triplex drive: Hägglunds CA50, Sauer-Danfoss 90R130 hydrostatic
  • Charge pump: 4" Bowie
  • Pulsation dampener: 2.5 gal, 5,000 psi
  • Discharge piping: 2" XXH
  • Hydraulic tank: 250 gal
  • Genset: 5 kW Fabco hydraulic drive
  • Belly jacks: RHK
  • Underdeck toolboxes

Operator console

  • Class 1 Div. 2, air purged
  • Screen display: triplex flow and pressure, hydraulic pressures and temperatures, BOP pressure
  • Crown Saver / Floor Saver
  • Digital weight indicator
  • Electronic drawworks joystick
  • Roda Deaco emergency air shutdown

Fluid tank

  • 8 m³ (8,100 L), TC406, aluminum, single compartment, 2 manways

More flushby rigs in the yard

All flushby rigs →
Resources

Documents & guides

Questions about this unit

Before you ask

Can you ship this unit to my country?

Yes — we ship worldwide from Calgary, Alberta. Your quote includes trucking, port handling and export documentation to your destination; lead time depends on the port and paperwork on your side.

Can I inspect it before buying?

Any time. Visit our Calgary yard yourself or send a third-party inspector — we'll have the unit ready, started and warm.

Is the paperwork in order?

The inspection report includes the unit's documentation and maintenance history (if available). If your jurisdiction needs a fresh certification, we can arrange it before delivery — ask for it in your quote.

Is the asking price negotiable?

Send a quote request with your offer and your timeline — a real person answers within 24–48 hours. Package pricing applies when you quote more than one unit.

01

Request your quote

Add units to your quote list and send it — no account, no payment online.

02

We confirm the details

Availability, inspection report, photos and video — answered by a real person.

03

Inspect & document

Third-party inspection welcome at our Calgary yard. Paperwork done right.

04

We ship worldwide

Trucking, port handling and export docs arranged to your destination.

Related reading from our guides

Canada Oilfield Equipment

Used oilfield service equipment — inspected in Calgary, Alberta and shipped worldwide. Ask for a quote and get a real answer from a real person.

+1 (403) 251-3808
Mon–Fri 8:00–17:00 MST