Shipping worldwide · Calgary, Alberta, Canada
Mon–Fri 8:00–17:00 MST+1 (403) 251-3808
Offshore NOV 180K Nitrogen Skid Pumper Unit – Nitrogen Pumpers for sale at Canada Oilfield Equipment, with international shipping. Image 1 of 6.1 / 6
Specifications

The unit, spec by spec

Ask and we'll send the full inspection report with photos.

MakeHydra Rig / NOV
Equipment TypeOffshore Nitrogen Pumper
Nitrogen Rate180,000 SCFH
Cold Ends1-5/8”
EngineDetroit Diesel Series 60
Engine Rating550 BHP
Engine Hours Since Rebuild0
PumpCS&P Triplex Pump
Working Pressure15,000 PSI stated for heat pot/system
High-Pressure Iron1502, inspected and recertified
Skid CertificationDNV 2.7-1
Lifting PackageCertified DNV sling set and shackles
Fuel TypeDiesel
ConditionRefurbished
LocateLouisiana, USA

Offshore NOV 180K Nitrogen Skid Pumper Unit

Hydra Rig NOV 180K Offshore Nitrogen Pumper Unit:

  • Make: Hydra Rig / NOV
  • Equipment Type: Offshore Nitrogen Pumper
  • Nitrogen Rate: 180,000 SCFH
  • Cold Ends: 1-5/8”
  • Engine: Detroit Diesel Series 60
  • Engine Rating: 550 BHP
  • Engine Hours Since Rebuild: 0
  • Pump: CS&P Triplex Pump
  • Working Pressure: 15,000 PSI stated for heat pot/system
  • High-Pressure Iron: 1502, inspected and recertified
  • Skid Certification: DNV 2.7-1
  • Lifting Package: Certified DNV sling set and shackles
  • Fuel Type: Diesel
  • Condition: Refurbished
  • 2,000 gallon nitrogen tanks

Additional Information

  • Hydra Rig / NOV 180K SCF Nitrogen Pumper
  • Offshore skid-mounted nitrogen pumping unit
  • C1D2 Detroit Diesel Series 60 engine rated at 550 BHP
  • Engine fully disassembled and rebuilt
  • Engine has 0 hours since rebuild
  • New engine components include crank, bearings, pistons, liners, injectors, seal kit, and hoses
  • Remanufactured engine components include turbo, head, injector pump, and air compressor
  • Emergency air intake shut-off valve installed for emergency shutdown
  • Radiator boiled, cleaned, and tested
  • Hydraulic pump drive removed, torn down, inspected, and rebuilt with new bearing races and seals
  • New flex plate installed
  • Hydraulic pumps disassembled, inspected, reassembled, and tested to factory specifications
  • Hydraulic tank and system cleaned
  • Filters and required hydraulic components replaced as needed
  • All hoses replaced with new hoses sized and pressure-rated for system service
  • Air tank pressure tested and tagged as required
  • New safety relief valve installed
  • Rebuilt air starter installed
  • Rebuilt air compressor installed
  • Electrical system inspected and repaired as needed
  • Rebuilt alternator
  • New charging and ground wires
  • Gel battery
  • LED lights
  • Pressure gauges replaced as necessary
  • Pressure gauges and chart recorder recertified and rebuilt
  • Unit blasted, three-coat zinc primed, painted blue, and top-coated
  • CS&P triplex pump
  • 1-5/8” cold ends
  • Heat pot and system stated as rated for 15,000 PSI working pressure
  • Boost pump inspected and repaired as needed
  • Exhaust system inspected and repaired as needed
  • Exhaust wrapped with insulation from turbo to tail pipe
  • High-pressure stainless steel fittings, tubing, and valves inspected and repaired or replaced as needed
  • High-pressure 1502 iron inspected and recertified
  • Newly fabricated DNV 2.7-1 certified skid
  • Skid full-load tested with certified paperwork
  • Certified DNV sling set and shackles included
  • All components and systems to be tested at MULE Services facility prior to shipping
  • Liquid N2 testing to be completed with any leaks or repairs corrected prior to release
  • Unit complete and ready to be tested with customer
  • Tanks to be blasted, painted, and vacuum checked
  • Gauges to be recertified
  • PRVs to be replaced or certified

Locate: Louisiana, USA

More nitrogen pumpers in the yard

All nitrogen pumpers →
Resources

Documents & guides

Questions about this unit

Before you ask

Can you ship this unit to my country?

Yes — we ship worldwide from Calgary, Alberta. Your quote includes trucking, port handling and export documentation to your destination; lead time depends on the port and paperwork on your side.

Can I inspect it before buying?

Any time. Visit our Calgary yard yourself or send a third-party inspector — we'll have the unit ready, started and warm.

Is the paperwork in order?

The inspection report includes the unit's documentation and maintenance history (if available). If your jurisdiction needs a fresh certification, we can arrange it before delivery — ask for it in your quote.

Is the asking price negotiable?

Send a quote request with your offer and your timeline — a real person answers within 24–48 hours. Package pricing applies when you quote more than one unit.

01

Request your quote

Add units to your quote list and send it — no account, no payment online.

02

We confirm the details

Availability, inspection report, photos and video — answered by a real person.

03

Inspect & document

Third-party inspection welcome at our Calgary yard. Paperwork done right.

04

We ship worldwide

Trucking, port handling and export docs arranged to your destination.

Related reading from our guides

Canada Oilfield Equipment

Used oilfield service equipment — inspected in Calgary, Alberta and shipped worldwide. Ask for a quote and get a real answer from a real person.

+1 (403) 251-3808
Mon–Fri 8:00–17:00 MST