1 / 46The unit, spec by spec
Ask and we'll send the full inspection report with photos.
Offshore Coil Tubing Skid Unit 80K
Overview
This complete offshore coil tubing unit (CTU) is a fully skid-mounted, rig-safe system engineered for demanding offshore well intervention operations. The package includes five major assemblies: a Control Cabin/Hose Reel Skid, Hose Reels & Hoses, a High-Pressure Open-Loop Power Pack, a Gear Drive Tubing Reel Assembly, and an Injector Head — all sandblasted, primed, painted, and factory acceptance-tested at a USA facility. The Unti comes with an additional 80K Injector HR680 fully refurbished.
Major Components
1. Control Cabin / Hose Reel Skid
- Aluminum cabin with 4-point lift and full surrounding crash frame (pin-connected for removal)
- Cabin elevates via four (4) hydraulic cylinders with mechanical lock; interior approx. 111" (L) × 76" (H)
- Explosion-proof exterior floodlights and interior lights wired to Zone II, UL Class I, Division II, Groups A, B, C & D (220V – 50Hz)
- Explosion-proof rooftop air conditioning unit
- Sliding access platforms with ladders, anti-slip grating, and handrails
- Full-width forward window (high-strength ¼" glass) with electric windshield wiper system
- "L"-shaped control console featuring:
- 8-bank BOP control valve with flip-up lockout latch
- Dual 6", 15,000 PSI gauges (wellhead & circulating pressure, 4:1 de-boosted)
- 80,000 lb. weight indicator (injector)
- CTES monitoring system (Orion & Cerberus)
- Electronic engine speed, kill, and emergency kill controls
- Injector traction, brake, chain tension, and speed controls
- 3-bank hydraulic valve for reel pay-off/take-up, levelwind raise/lower and override
- Air-driven emergency backup pump (5,000 PSI to stripper)
- Skid Dimensions: 14' (L) × 8'6" (W) × 8'2" (H) | Weight: 12,000 lbs.
2. Hose Reels & Hoses
- (1) Hydraulically powered hose reel for injector control hoses (125 ft, size-optimized)
- (1) Hydraulically controlled BOP hose reel with 12 hoses × 125 ft (fire-resistant last 15 ft) + 4 extra BOP lines
- Skid-mounted hydraulic power hose reel for two (2) 1-½" × 125 ft injector power hoses
- Bulkhead panel for direct jumper-hose connection; reels are removable from cabin skid
- All hose bundles: quick disconnects with indexed connections, oil-resistant jacketing, chain support for weight during operation
- Cold-drawn steel drive sprockets (not cast)
- 30 ft jumper hose bundle included for power unit connection
3. High-Pressure Open-Loop Power Pack
- Engine: Caterpillar C-15 Diesel, rig safe, with triple pump drive on flywheel housing
- Full protective 4-point lift frame (welded, fully surrounding)
- Stainless steel / waterproof control panel with electric throttle, electronic fuel kill, emergency air shutoff, and engine gauges
- System shutdowns: over-temperature, overspeed, loss of oil pressure, loss of coolant, high exhaust temperature
- Spark arrestor exhaust, sealed crankcase, crankcase breather flame traps, anti-static fan drive belts
- Diesel-lubricated air starter with 30-gallon reservoir; Bendix AD-9 air dryer (rated to 100% humidity, -10°C to +45°C)
- 12 CFM engine-driven air compressor
- All hydraulic pumps: Denison brand
- Injector drive: 120 GPM Denison variable displacement open-loop load sense axial piston pump
- Stainless steel hydraulic oil reservoir (240-gallon capacity) and fuel tanks (100-gallon diesel, stainless steel)
- Air-to-oil heat exchanger sized for 140°F ambient; heavy-duty solder-dipped radiator
- Four (4) 3,000 PSI BOP accumulators (10 gallons each); nitrogen bottle for emergency engine start
- 30-gallon air reservoir with filter and regulator
- Skid Dimensions: 13' (L) × 8'5" (W) × 8' (H) | Weight: 14,600 lbs. (full fluids)
4. Gear Drive Tubing Reel Assembly
- Capacity: Up to 18,000 ft of 1-½" coiled tubing
- Spool: 120" OD rim, 72" core diameter, 72" inside width
- Gear drive with integral brake; spools 2" tubing at ≤2,500 PSI hydraulic pressure
- Mechanical diamond leadscrew levelwind with adjustable clutch, hydraulic override, counterbalance valve
- Internal & external plumbing: SPM 2×2 valves, 10,000 PSI integral 1502-type fittings; flange-mounted 4:1 debooster
- 10,000 PSI circulating swivel (2" bore, proof-tested to 15,000 PSI; H2S and non-H2S service)
- 30-gallon lubrication reservoir with spray wand system
- Spreader bar (stamped 100,000 lbs.) with two-leg sling, shackles, master link, and thimbles
- Tubing guide counter adjustable for 1" through 2.88" tubing; reads in feet or meters
- Non-lift removable protection frame with dual access ladders; encoder data acquisition mount
- Skid Dimensions: 148" (L) × 102" (W) × 122" (H) | Full-length drip pan with corner drains
5. Injector Head
- Handles coiled tubing 1-½" OD through 3-½" OD; compatible with open-loop and closed-loop hydraulic systems
- Pull Capacity: 80,000 lbs. continuous @ 4,400 PSI | Max speed: 150 ft/min (60 GPM) | Snubbing: 40,000 lbs.
- 33:1 deep reduction gear drive transmission with dual output shafts and dual oil seals
- Dual high-speed/high-pressure bent-axis variable displacement piston motors with counterbalance safety valves
- Spring-applied/pressure-released modular brake between motor and gearbox
- 200-pitch heavy-duty roller chain with precision cast carriers; grooved and hardened half-round gripper blocks
- Gripper sizes available: 1-½", 1-¾", 2", 2-⅜", 2-⅞", 3-½"
- Dual single-acting hydraulic load cells (pipe-heavy and pipe-light indication)
- 4-point outer lifting/crash frame rated for 90,000 lbs. operational lifting capacity
- 72" radius tubing guide arch with contoured steel rollers (fold-down or removable)
- Telescoping and fixed support legs included; stripper flange mount (configuration per purchaser spec)
- Injector transport skid with crash frame accommodates injector, stripper, BOPs, and gooseneck
General Specifications
- Complete unit sandblasted, primed, and painted to purchaser-specified color
- Full factory assembly and acceptance testing performed at USA facility
- All lifting eyes load-tested to minimum 1.5× rated SWL with post-test NDE inspection; documentation provided
- All hoses supported with clamp systems and protected with rubber sleeves
- Self-locking nuts used throughout where required
Documents & guides
Before you ask
Can you ship this unit to my country?
Yes — we ship worldwide from Calgary, Alberta. Your quote includes trucking, port handling and export documentation to your destination; lead time depends on the port and paperwork on your side.
Can I inspect it before buying?
Any time. Visit our Calgary yard yourself or send a third-party inspector — we'll have the unit ready, started and warm.
Is the paperwork in order?
The inspection report includes the unit's documentation and maintenance history (if available). If your jurisdiction needs a fresh certification, we can arrange it before delivery — ask for it in your quote.
Is the asking price negotiable?
Send a quote request with your offer and your timeline — a real person answers within 24–48 hours. Package pricing applies when you quote more than one unit.
Request your quote
Add units to your quote list and send it — no account, no payment online.
We confirm the details
Availability, inspection report, photos and video — answered by a real person.
Inspect & document
Third-party inspection welcome at our Calgary yard. Paperwork done right.
We ship worldwide
Trucking, port handling and export docs arranged to your destination.
Related reading from our guides
The complete guide to buying surplus oilfield equipment
How to judge condition, paperwork and price on used iron — before you wire a deposit.
Operations5 essential supplies for oilfield operations
The gear that keeps a service unit like this one working between jobs.
SourcingCustomized oilfield equipment solutions for your needs
When the yard doesn't have it: how we source and configure equipment to your spec.












































