Description

2015 Western Star Tandem/Tridem Flushby – Automated Rig Technologies Telescopic Double Rod Rig, 35-Ton Hookload, Plumbed for Coiled Rod Injector (Rig 16)

This is a low-hour 2014 flushby and rod rig with only 49,313 km and 4,313 hours. It is mounted on a Western Star tandem steer / tridem drive chassis. The rig is a 2014 Automated Rig Technologies (ART) telescopic double mast with 72′ of clear height under the crown and a 35-ton (70,000 lbs) maximum hookload. The mast is built to API 4F, 4th Edition. The fluid end has a Gardner-Denver 3 x 5 triplex rated for 5,000 psi and an 8 m³ aluminum TC406 tank. It also has a 35,000 lbs hydraulic drawworks and an air-purged Class 1 Div. 2 operator console. The rig is set up for conventional sucker rod service and is plumbed for a coiled rod injector. The injector is not included.

Confirmed

Unit

• Truck: 2014 Western Star, tandem/tridem
• Rig: 2014 Automated Rig Technologies telescopic double rod rig
• Kilometres: 49,315
• Hours: 4,313
• Weight: 65,000 lbs (spec sheet range is 65,000–70,000 lbs)
• Width: 2.6 m (8’6″)
• Height: 4.2 m (13’9″)

Mast

• Design: API 4F, 4th Edition; PSL 1; SSL E1/U1
• Lighting: Class 1 Div. 2 (API RP 505)
• Wind rating, unguyed mast: 32 knots operating, 60 knots unexpected, 75 knots expected
• Operating temperature: −20 °C to +40 °C
• Max hookload: 35 tons (70,000 lbs)
• Lines: 2-line, 1″ (API 9A/9B)
• Clear height under the crown: 72′
• Clear height under the rod board: 57′
• Crown sheaves: 24″ Nylatron (×2), Timken bearings
• Travelling block: API 8C, 35-ton, 22″ sheave
• Rod hook: 25-ton
• Rod board: 25′ doubles, 1″ max rod size
  • 5/8″ rods: 13,000′
  • 3/4″ rods: 10,500′
  • 7/8″ rods: 9,000′
  • 1″ rods: 7,800′
• Cylinders: RHK scoping and raising cylinders
• Fall arrest: Miller self-retracting lifelines
• Rod transfer: pneumatic
• Lighting: full mast lighting with a strobe on the crown

Rear module

• Drawworks (hydraulic): 1″ spiral-groove drum, 35,000 lbs single-line pull, about 840 ft/min
• Service winch: Pullmaster PL5, 4,500 lbs
• Drill line: slip-and-cut spool with 400′ of 1″ line
• Deadline anchor: 35,000 lbs, with electronic line-rider weight indicator
• Outriggers: Maxistab 3-EAH/K, 16’4-7/8″ max extension
• Workfloor: 8′ × 5’8½”, height adjustable from 4′ to 8’6″

Front module

• Triplex: Gardner-Denver 3 x 5 (TEE), 3″ plungers, 5,000 psi
• Triplex drive: Hägglunds CA50, Sauer-Danfoss 90R130 hydrostatic
• Charge pump: 4″ Bowie
• Pulsation dampener: 2.5 gal, 5,000 psi
• Discharge piping: 2″ XXH
• Hydraulic tank: 250 gal
• Genset: 5 kW Fabco hydraulic drive
• Belly jacks: RHK
• Underdeck toolboxes

Operator console

• Class 1 Div. 2, air purged
• Screen display: triplex flow and pressure, hydraulic pressures and temperatures, BOP pressure
• Crown Saver / Floor Saver
• Digital weight indicator
• Electronic drawworks joystick
• Roda Deaco emergency air shutdown

Fluid tank

• 8 m³ (8,100 L), TC406, aluminum, single compartment, 2 manways