Shipping worldwide · Calgary, Alberta, Canada
Mon–Fri 8:00–17:00 MST+1 (403) 251-3808
SoldFlushby Unit 4900 (sold) – Used oilfield equipment at Canada Oilfield Equipment, with international shipping. Image 1 of 33.1 / 33
Specifications

The unit, spec by spec

Ask and we'll send the full inspection report with photos.

EngineDetroit DD16 15.6L, 560 HP.
450HP 11 ratio two shaft split box c/w air shift

FLUSHBY UNIT 4900

  • 2015 Western Star W4900TS / tandem steer tridem drive.
  • Engine: Detroit DD16 15.6L, 560 HP.
  • 88 hours
  • 2512 km.
  • Eaton Fuller 18 speed transmission.
  • 54’ free-standing mast, 65’ 11” crown to ground. 65,000 lbs static hook load vertical and 50,000 lbs static hook load slant work.
  • Gardner Denver, TEEF 4X5, Triplex Pump c/w Coors #10 steel valves, 6” suction manifold.
  • High pressure piping threaded c/w Oteco relief valve (Neutron Valves)
  • 450HP 1:1 ratio two shaft split box c/w air shift
  • 4:1 ratio chain case assembly c/w splined input shaft
  • Drive-lines fabricated & balanced to accommodate split box and chain case
  • Esso Gear 75W90-GX Extra oil for split box, chain case & triplex
  • Bowie three inch (3”) nitrile geared pump & hydraulic drive package, grease manifold, drip tray mounted on passenger side.
  • Bowie controls at rear control panel
  • Chelsea eight bolt Power-take-off c/w air shift
  • Hydraulic wet kit c/w pumps, filter, piping, hoses, fittings and oil
  • Power tong/BOP circuits
  • Two (2) SJ100 hydraulic rear leveling jacks c/w controls & jack stands
  • Split nuts for SJ100
  • Operators control panel c/w standard controls/gauges
  • HL-25-7-86-3-559 Pullmaster hydraulic winch c/w two speed rapid reverse and 3/4” groove drum (large drum) 3/4” cable for HL25 winch – 350 feet
  • Pullmaster PL5 auxiliary winch
  • 3/8” cable, chain and hook for auxiliary winch
  • Fifty-three (53ft) Flushby mast rated at 65,000# hook load vertical and 50,000# slant
  • Slant tray in mast (Square)
  • Two (2) hydraulic mast raising cylinders
  • Slant arm package c/w controls
  • Two sheave crown assembly for 3/4” wire rope
  • Custom fabricated A-Leg assembly
  • Engineer’s Certification and Inspection (Alberta-Saskatchewan)
  • 65,000 # single sheave traveling block (Heavy Duty)
  • Custom fabricated headache rack assembly
  • Over cab cable protector
  • Cable anchor bar for slip program
  • Rear bumper boxed c/w tow hook
  • One (1) cabinet tool box c/w doors at each end, light and heater mounted behind cab across frame
  • Two (2) aluminum tool boxes, mounted RH and LH rear (drawers in LH box)
  • One (1) varsol tank large with dry compartment –near Bowie as room permits
  • Pail holders as room allows
  • Standard light package c/w back-up alarm
  • Rod BOP c/w hand pump and 25Ft. fire-guard BOP hose (BOP mount)
  • Working floor adjustable for multiple working heights and ladder
  • Fall arrestor safety device c/w certified mounting block.
  • One (1) 25 ton Trico rod hook
  • Two (2) 25 ton Trico rod elevators c/w (4) -1” and plates and screws
  • One (1) 25 ton 1 ¼” plate type elevator c/w (2) 1 ¼” plates and screws
  • Ø Two (2) ¾” x 7/8” rod wrenches
  • Two (2) 1” rod wrenches
  • Trico rod spinner
  • Ground reel and cable
  • Fire extinguisher (2) 30 # ABC Type
  • Emergency warning system
  • Hydraulic weight indicator
  • Advance Aluminum Tank – 1.5m3 hydraulic/ 9m3 product Code TC406 Crude
  • Mounting plate and rest for hydraulic picker
  • 3” suction hose
  • 1 1/2” 5000# pressure hose
  • Electronic Titan tank level gauge (installed)
  • Electronic pressure gauge
  • Electronic counter totalizer

More units in the yard

Resources

Documents & guides

Questions about this unit

Before you ask

Can you ship this unit to my country?

Yes — we ship worldwide from Calgary, Alberta. Your quote includes trucking, port handling and export documentation to your destination; lead time depends on the port and paperwork on your side.

Can I inspect it before buying?

Any time. Visit our Calgary yard yourself or send a third-party inspector — we'll have the unit ready, started and warm.

Is the paperwork in order?

The inspection report includes the unit's documentation and maintenance history (if available). If your jurisdiction needs a fresh certification, we can arrange it before delivery — ask for it in your quote.

Is the asking price negotiable?

Send a quote request with your offer and your timeline — a real person answers within 24–48 hours. Package pricing applies when you quote more than one unit.

01

Request your quote

Add units to your quote list and send it — no account, no payment online.

02

We confirm the details

Availability, inspection report, photos and video — answered by a real person.

03

Inspect & document

Third-party inspection welcome at our Calgary yard. Paperwork done right.

04

We ship worldwide

Trucking, port handling and export docs arranged to your destination.

Related reading from our guides

Canada Oilfield Equipment

Used oilfield service equipment — inspected in Calgary, Alberta and shipped worldwide. Ask for a quote and get a real answer from a real person.

+1 (403) 251-3808
Mon–Fri 8:00–17:00 MST